The Best Flap Barrier Gate for Variety System in Singapore
Half Height Flap Barrier Gate - ST-FP-01
- Fault self-recovery and corrective measure ability, convenient for maintenance and adjustment.
- Human-oriented model indication function, real time displaying, improve the passing rate.
- Automatic counting indicating passenger’s number (optional).
- Resetting automatically, auto cancel the pass through and closed barrier in case there’s no pass through the flap barrier gate, in a pre-set timing.
- Fail-Safe function with UPS to meet Fire-safety regulation.
- Break-in, tail-barrier gate, over-pass and reverse alert function to maintain safe and effective passage.
- Standard input/output port to integrate with most access control systems and able to manage the integrated systems through the remote PC.
Product Rating
5/5
Specification of Flap Barrier Gate - ST-FP-01
| Power Voltage | AC220+10%,50Hz |
| Drive Voltage | DC24V5A |
| Communication Port | RS485 |
| Gate Opening & Closing Time | 0.5s |
| Structure | Frame on 304 Stainless Steel Cover |
| Open Direction | Single / Double (Bi-directional) |
| Work Environment | Indoor / Outdoor |
| IP Rating | IP43 |
| Width of Passage | <260mm |
| Length of Bar | 600mm |
| Operation Condition | -15°C – 60°C |
| Relative Humidity | 95% Non-Condensation |
| Service Life | > 3 million |
| Input Signal | 12V DC |
| Working Current | <2000mAh |
| Dimension | 1000 x 300 x 980mm (Long*Width*Height) |
Half Height Swing Barrier Gate - ST-SW-03
- Anti-Pinch mechanical structure, anti-bumps function, when the swing arm reset process meet resistance,
within a limited time automatically stops the motor, the default delay after the reset again (until reset), and the force is very small (≤2Kg ). - Anti-intrusion function, when the gate signal is not received, the arm will locked automatically.
- With automatic reset function, after the barrier gate opening, within a specified period of time not pass, the system
will automatically cancel the user’s access Permissions. - Adjustable normally open or normally closed, in order to meet the requirements of different venues.
- Compatible with a most reader device, integrate via dry contact signal.
- Unidirectional or bidirectional control of personnel access.
- Remote control and management by the management computer.
- Fail-Safe mode to meet fire safety requirements
Product Rating
5/5
Specification of Flap Barrier Gate - ST-SW-03
| Power Voltage | AC220+10%,50Hz |
| Drive Voltage | AC24V5A |
| Open Angle | 90° |
| Pass Speed | Less than 35 person/minutes |
| Structure | Frame on 304 Stainless Steel Cover |
| Open Direction | Single / Double (Bi-directional) |
| Work Environment | Indoor / Outdoor |
| IP Rating | IP43 |
| Width of Passage | <550mm |
| Length of Bar | 600-900mm |
| Operation Condition | -15°C – 60°C |
| Relative Humidity | 95% Non-Condensation |
| Service Life | > 5 million |
| Input Signal | 12V DC |
| Working Current | <2000mAh |
| Dimension | 1600 x 180 x 990mm (Long*Width*Height) |
Explore More Alternative Solution
Tripod Turnstile Gate
Half height single/bi-directional tripod regulate pedestrian access. Best work with Fingerprint / Card Reader.
Full Height Turnstile Gate
Single/Double lane full height prevent anti directional access. Access granted allow one person to pass through on one direction at a time. Support all type of access control reader.